EATON TRIPP LITE SERIES MASTER-POWE

UPS SMART 1000VA 750W MEDICAL AVR 120V 4OUT USB DB9 HOSPITAL

SKU: 847980VPN: SMART1200XLHG

UPS SMART 1000VA 750W MEDICAL AVR 120V 4OUT USB DB9 HOSPITAL

Key Features

  • Corrects under- and overvoltages from 81V to 143V
  • 4 NEMA 5-15R-HG outlets
  • Front-panel LEDs indicate load, power, voltage and battery statuses
  • Expandable runtime with optional external battery packs
  • 28 min. runtime at half load; 10 min. at full load
Request a Quote on This Product

Adding to inquiry lets you bundle multiple products into a single quote request.

Overview

Tripp Lite's SMART1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 28 minutes of runtime for a half load or 10 minutes for a full load, so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output without drawing battery power. The SMART1200XLHG's built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise, while maintaining full AC surge suppression in all modes. This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a six-foot cord for flexibility in placement. All four outlets provide both backup protection and surge protection rated to 940 joules. The SMART1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite's included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Ideal UPS Backup in Healthcare Facilities

  • Complies with UL 60601-1 standards for use in patient-care facilities
  • Isolation transformer with Faraday shield offers full isolation and removes common mode noise
  • 6 ft. power cord with 120V NEMA 5-15P-HG plug
  • Floating AC output prevents noise coupling and meets agency requirements for isolation


Reliable Battery Backup and Surge Protection

  • Supports half load up to 28 min. and full load up to 10 min.
  • 4 NEMA 5-15R-HG outlets with 940-joule surge protection
  • Filters out disruptive EMI/RFI line noise that can cause equipment damage or data loss
  • Resists electrostatic discharge


LEDs and Audible Alarms

  • Front LEDs indicate power, mode, load and battery status
  • Alarms alert you to power failure, overload and low battery
  • Mute/quiet mode ideal for use in quiet patient-care vicinities


Saves Files When You're Away

  • Included PowerAlert® software enables safe, unattended system shutdown and file saving during power failures
  • Connects to computer via DB9 or USB port with included cables

Tech Specs

UPS SMART 1000VA 750W MEDICAL AVR 120V 4OUT USB DB9 HOSPITAL specifications
USBYes
AlarmOverload
Depth9"
Width7.5"
Height12.8"
Brand NameTripp Lite series
Cord Length6 ft
Form FactorTower
Battery Life6 Year
ManufacturerEaton Corporation
Product LineSmartPro
Product NameSmartPro 1200XLHG UPS
Show all 37 specs
Product TypeLine-interactive UPS
Hot SwappableYes
Input Voltage120 V AC
Transfer Time4 ms
Output Voltage115 V AC
Product FamilySmartPro
Receptacle TypeNEMA 5-15R
Package Contents<ul><li>SmartPro 1200XLHG UPS</li><li>SMART 1200XLHG Medical Grade Tower UPS System</li><li>PowerAlert Software and cabling</li><li>Warranty information</li><li>Instruction manual</li></ul>
Battery ChemistryLead Acid
Country of OriginTaiwan
Receptacle Detail4 x NEMA 5-15R
Status IndicatorsIncludes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning
Load Capacity (VA)1000 VA
Network ManagementSNMP Manageable
Plug/Connector TypeNEMA 5-15P
Load Capacity (Watt)750 W
Weight (Approximate)44.60 lb
Additional Information<ul><li>Ideal UPS protection for applications in medical patient-care areas where UL 2601-1 listed medical electrical equipment is required</li><li>Maintains less than 300 microamps leakage current for UPS and all connected equipment</li><li>Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes</li><li>Provides connected equipment with continuous power during short and long duration loss of commercial power</li><li>Expandable runtime is available with the addition of one or more external battery packs (part# BP36V27)</li><li>Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power</li><li>Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections</li><li>Full line isolation prevents shock potential and operational problems in sensitive electronic equipment</li><li>Resistant to electrostatic discharge</li><li>Supports loads up to 1000VA / 750 watts</li><li>34 minutes half load runtime (500VA/375 watts), 16 minutes full load runtime (1000VA/750 watts)</li><li>4 protected hospital-grade outlets; 6-ft. cord</li><li>1-RS-232 and 1-USB serial port for network interface; SNMP compatible</li><li>SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory</li><li>Complete surge protection, line isolation and EMI/RFI noise filtering</li><li>2 year product warranty</li><li>PowerAlert unattended shutdown software and complete cabling included</li><li>5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace</li><li>Battery replacement door</li><li>Back panel grounding lug</li></ul>
Manufacturer Part NumberSMART1200XLHG
Certifications & StandardsUL1778 (USA, Series AGSM1200PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications
Backup/Run Time (Full Load)10 Minute
Backup/Run Time (Half Load)28 Minute
Manufacturer Website Addresshttp://www.eaton.com
Maximum Operating Temperature104°F (40°C)
Typical Battery Recharge Time4 Hour

Datasheets & Resources

Have a question about this product?

Ask us about compatibility, pricing tiers, lead time, or anything else. We typically reply within one business day.

Request Quote